Телефон bluboo s8+.Хотел перепрошить и забыл сделать бекап,в итоге-кирпич.
Но теперь шиться никак не хочет,драйвер mtk появляеться,но загрузка прошивки постоянно зависает на красной полосе download DA,все варианты ее устранения перепробовал. Может кто-нибудь помочь?
ошибка какая? напиши номер, можно в HEX
Fish, STATUS_EXT_RAM_EXCEPTION (0xC0050005)
ссылку на прошивку можно?
Спасибо,что помогаешь https://drive.google.com/drive/folde. gzuHFvlFbUIPib
как определяется в диспетчере устройств?
Еще проблема,что memory test,форматирование,ничего не проходит
причина прошивки какая была?
USB\VID_0E8D&PID_0003&REV_0100
как я понял,он по аварийному порту подключается
Емкость батареи неверная была,возможно продавец подправил
а если на выключенном телефоне зажать обе кнопки громкости и подключить к ПК?
а другую прошивку выложенную на 4пда пробовал залить? вот эту: https://cloud.mail.ru/public/DN1u/6WNnvh37S
а если на выключенном телефоне зажать обе кнопки громкости и подключить к ПК?
а другую прошивку выложенную на 4пда пробовал залить? вот эту: https://cloud.mail.ru/public/DN1u/6WNnvh37S
Пробовал,все равно так же,дальше красной полосы не идет,еще в чем проблема,я даже форматировать не могу.чтоб все по новой залить
а) попробуй прошить только один preloader (только на против него поставить галочку)
б) попробуй переустановить на всякий случай драйвер предварительно вычистив старые
в) попробуй сменить версию SP Flash Tool на более свежую
г) ну и цитата с 4пда с профильной темы:
да и у тебя точно версия plus? (внешне очень похожи)
OPPO_R9m вопрос по русификации
Start at : [14.06.2016 / 17:05:04]
Operation : Read Flash [ v1.49 ]
xGPT : Normalize settings Ok!
Brand : OPPO
ProdName : R9m
ProdModel : OPPO R9m
Device : R9
AndroidVer: 5.1
MTKxCPU : MT6755
MTKxPRJ : R9m_11_A.13_160314
[Read Ok] : preloader_oppo6755_15111.bin
[Read Ok] : recovery.img
[Read Ok] : md1img.img
[Read Ok] : md1dsp.img
[Read Ok] : md1arm7.img
[Read Ok] : md3img.img
[Read Ok] : lk.bin
[Read Ok] : lk2.bin
[Read Ok] : boot.img
[Read Ok] : logo.bin
[Read Ok] : tz1.img
[Read Ok] : tz2.img
[Read Ok] : secro.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[ScatCFG] : MT6755 / V1.1.2 / oppo6755_15111 / EMMC
Android Info saved
HWConfig Info saved
FW Size : 2110 MiB
Scatter saved to : D:\WORK\Android\oppo\MT6755__OPPO__OPPO_R9m__R9__5.1__R9m_11_A.13_160314\
Скачал у индусов X9009EX_11_OTA_017_all_201605290913.zip, пересобрал system.img и попытался прошить его sp flashtool 1620.
получил
Chinese Miracle II [MTK module] v 1.49
Start at : [18.06.2016 / 14:37:45]
Operation : Flash [ v1.49 ]
M67BL : Check eMMC compatibility
M67BL : eMMC supported by BootLoader!
Checking and verifying PMT info
M67BL : Flash Erase
Total blocks to Erase : 5
Erase : 0x0000000000008000-0x0000000003F80000
Erase : 0x0000000004088000-0x0000000004000000
Erase : 0x0000000009800000-0x0000000001000000
Erase : 0x000000000AB00000-0x0000000002400000
Erase : 0x000000000D400000-0x0000000E813FBE00
Flash Erase Done, time used : 00:00:16
Processing : Writing all Flash Files
Flash Partition : PRELOADER
Flash PLC
Image Flash Ok
Flash Partition : RECOVERY
Image Flash Failed!
Region Finalize ACK not received! Empty battery or Cable problem?
Operation Failed
Elapsed: 00:00:50
Reconnect Power/Cable!
Finish at : [18.06.2016 / 14:38:34]
После этого телефон только вибрирует. Абсолютно понимаю, что ошибся, когда не придал значения ошибке подписи.
Вопрос, можно ли с ним что-то сделать, или начинать искать плату?
Chinese Miracle II [MTK module] v 1.50
Start at : [18.06.2016 / 15:54:05]
Operation : Flash [ v1.50 ]
M67BL : Check eMMC compatibility
M67BL : eMMC supported by BootLoader!
Checking and verifying PMT info
Processing : Writing all Flash Files
Flash Partition : PRELOADER
Flash PLC
Image Flash Ok
Flash Partition : RECOVERY
Image Flash Failed!
Region Finalize ACK not received! Empty battery or Cable problem?
Operation Failed
Elapsed: 00:00:14
Reconnect Power/Cable!
[TUT]MTK Android (Sp flash tool ) tutorial
Breadcrumb
sunsero
Senior Member
And how are you sure that is a virus? Just for this wrong report?
saabman.aero
New member
SandsCayman
Member
— Scope of this thread
The scope of this thread is ONLY to discuss about SP Flashtool program
— How to use Flashtool
— Report Flashtool errors and how to fix it.
Any other issues not related about Flashtool and its use should be posted in other specific thread.
Please DON’T discuss here about specific device issues like
— Where find ROM for a device
— How to fix problem on device
— etc
— Flash Tool hardware compatibily
SP Flash Tool are for Smartphone products
Mediatek MT62xx Familiy chips
Mediatek MT65xx Familiy chips
Mediatek MT67xx Familiy chips
To use Flashtool you should have installer Mediatek USB preloader driver.
There are two types of USB driver for Mediatek devices.
— ADB USB driver for device working and switched on.
— Preloader USB driver to flash the device that is switched off.
To use Flashtool, in the PC should be already installed the USB Mediatek Preloader driver.
This the latest version of Mediatek driver.
This is the all-in.one driver (include both USB ADB & preloader driver).
Is not required to disable driver sign in Windows.
The driver is compatible with all 32/64bit Windows OS’s (from Windows XP to Windows 10).
How to install the USB ADB/Preloader driver
Flashtool v. 5.x fixed a critical bug about SP Flash Tool 3.x where the SP Flashtool reads incorrectly the scatter file of some new mobile based on MTK6582 (error: recovery partition is not flashable).
— SP Flash Tool archive mirror sites
If you get an error like «PMT Changed» (it means that partition scheme of current ROM and new ROM are different) and are you sure that the ROM is specific for your device you can use a special version of Flashtool 3.xx that bypass this error.
To bypass a «PMT changed» error (it means that the partition scheme described in the scatter of the new ROM is different than the ROM installed) there are two ways
— If you have to flash the whole flash you can select in Flashtool the FIRWARE UPGRADE mode.
— If you have to flash single module/partition you can use Direct Memory Write
Any help would be MASSIVELY appreciated.
bovirus
Senior Member
Please remove your QUOTE.
Just post your question without quoting an entire post.
Thanks.
Itachidori
New member
Hi there,
I have a problem flashing a Umi super. I think I did everyting right but I allways get the same error: «error status_stor_life_exhaust(0xC003001D) the storage in your device has reached end of life, please change to use new device to do operations»
I dont think it the drivers, the flashtool recognises the phone and 3 seconds later gives this error, and the phone worked fine before this.
Thanks to anyone who knows something about this
odelind
New member
After having some problems with my Cubot J5, I followed the seller’s recommendations and tried to update the drivers with the flashtools. In the end, it got bricked and doesnt charge or turn on. The program still detects the phone but its stuck in a loop between the errors 6128 and 1041 based on whenever I checked or not the options withing the Downloads section (the solution for one of the errors should be deleting checksum.ini as well, but I can’t find the archive itself). Is there a way to make the phone functional again?
P.S.: I did a memory check and got these two errors:
-NAND flash not detected
-UFS not detected
aryanhington
Senior Member
Ali1244
New member
Ali1244
New member
pixapo
Senior Member
aryanhington
Senior Member
DADi590
Senior Member
My ZTE Blade L3 (now hardware broken after a mod with the antennas. ) with MT6582M says otherwise, in the various times I did that to it XD. Also the phone of a friend of mine which is an Elephone P8000 B with MT6753 says the same my older phone used to haha.
ПРОБЛЕМА ПРОШИВКИ MEIZU M6T
Здравствуйте, телефон был заблокирован, флайм аккаунтом, я попробовав его перепрошить превратил в кирпич (пробовал не тем способом каким надо было, изначально пробовал флештулом тоже не помогло) не получалось даже когда он запускался, сейчас он просто грузится бесконечно, в флеш туле выдаёт ошибку error status sec write data not allowed 0xc002000c если использовать format all+download, если в Download only выдаёт status device exception, коротко говоря никаким образом не желает шиться, если можете помогите чем сможете, заранее благодарен)
телефон meizu m6t m811h
в теме на 4pda глянь https://4pda.ru/forum/index.php?show. ost&p=94180135
автор имеет в виду каждый раздел по отдельности?
Ошибка 0xC0050001
Сообщение: Ошибка: STATUS_DEVICE_CTRL_EXCEPTION (0XC0050001)
значение: Прошивка, которую вы пытаетесь прошить, либо несовместима с вашим устройством, либо вы выбрали неправильные настройки прошивки
.:
Убедитесь, что файлы, которые вы пытаетесь прошить, на самом деле предназначены именно для вашей модели телефона
Удаление и переустановка драйверов Mediatek
===============================
нашёл ошибку, на счёт прошивки то скачал я которая была с 4pda, другую я не знаю откуда брать которую можно было бы через флеш тул, пробовал искать не могу ничего, только и предлагают через рекарвери, а он то у меня не работает
======
в драйвере думаю проблем нет всё определяется PreLoader USB VCOM Port (Com3)
================
настройки прошивки, ну тут я даже не знаю какие они могут быть, в флеш туле, уже пару дней никак его оживить не могу
========================
через mrt процесс не доходит до конца, дошёл примерно до 80% и процесс останавливился, сейчас даже не хочет начинаться
=========================
похоже проблема в драйверах, попробую поиграть с ними
Breadcrumb
Rajeev7105
New member
Ramchander XDA
New member
Blackburn235
New member
Jeewan Deep
Senior Member
Hi! I am posting after a Long time and need help with my bricked Phone. Thanks for the Guide @Vikramgk007.
Ok, so the current situation is my Lenovo k8 note does flashes up the boot screen and then shows fastboot (which i don’t know what it does).
Can press vol up + power button and try entering into Recovery mode but stuck at NO COMMAND with the ANDROID lying down but no options after pressing power button or any key.
Yes. i had selected Format + Download earlier.
Other errors which came up in different situations :
STATUS_UPLOAD_EXCEPTION (0xC0050004)
STATUS_UNSUPPORT_OP (0xC0040001)
STATUS_BROM_CMD_SEND_DA_FAIL (0xC0060003)
STATUS_DEVICE_CTRL_EXCEPTION (0xC0050001)
Please guide me, if my phone still can be fixed.
GSM KING MAKER
Member
Similar threads
Breadcrumb
Top Liked Posts
If you tried to downgrade from Oreo to Nougat and your device is hard bricked. Don’t Worry, follow the procedure below.
1. If your device is fully hard bricked and doesn’t boots up by pressing power button, and also the white LED light doesn’t lights up while u connect charger/power on USB to pc. Try pressing all the 3 buttons, Volume Up+Volume Down+Power Button for about 25-30 seconds and connect your phone through USB to SP Flash Tool (install all drivers before as said in step 3) and see whether it detects (If it detected, go to step 3). If this also didn’t worked, don’t get panic this is the only way
2. Remove your phone back cover carefully and disconnect only the battery connector as shown in the video (https://www.youtube.com/watch?v=S_joZSalYNc). Use proper tools and screw driver. Now connect the charger and see, the LED light will blink surely (If it doesn’t blinks now also, then it’s a hardware problem, you should go to service centre only)
( CAUTION : Don’t select Format all+Download because if you forgottenly gave Format All+Download option it will delete all your IMEI no, Device Serial no, WIFI MAC address and Bluetooth Address. Make sure you know all your IMEI no, device serial no
4. In the Scatter-Loading file click Choose and load MT6797_Android_scatter.txt under the extracted Oreo Rom (whichever version you prefer)
Wait for sometime untill it loads.
5. Now click on Download Button. Then switch off your phone and keep pressing Volume UP button while connecting your phone to PC through USB.
6. Now your phone will be flashed successfully and you will get a message Download OK. Close that and remove your USB and Power On your phone. Your phone will boot in Oreo, and you have unbricked your phone. Enjoy.
2. Download Nougat Rom : (whichever version you prefer)
1.69 GB) COUNTRY : USA
2.09 GB) COUNTRY: GLOBAL
2.10 GB) COUNTRY: GLOBAL
https://mega.nz/#F!EXphwJLb!Us6WQxEOAonVCrmLomxjHw (fastboot_manning_retail_user_7.1.1_NMB26.54-35-2_2_release-keys_retail_US.zip
2.01 GB) COUNTRY : USA
3. Extract the downloaded zip file and Go to Fastboot mode manually as mentioned before. (Switch off, Press Volume UP+Power button at same time. Release Power button while phone vibrates. Then Choose Fastboot option using Volume Up Key and select it using Volume Down Key)
4. Connect the USB Cable from phone to PC and Double click the flashall.bat file inside the downloaded zip. 
5. It will boot automatically and go to Nougat Rom. If you got some error on it or force stop apps or bootloop don’t worry.
Switch off your phone by long pressing power key
6. Go to Recovery Mode manually (Switch off, Press Volume UP+Power button at same time. Release Power button while phone vibrates. Then Choose Recovery option using Volume Up Key and select it using Volume Down Key. Now you will get a Android dead kinda symbol. Press Volume UP + Volume Down +Power button, you will see Recovery Mode). Choose Wipe Data/Factory Reset and Yes—delete all user data. See this video if you have doubts how to factory reset using recovery mode : https://www.youtube.com/watch?v=vPhUHdO85ys
7. Then select Restart System now in Recovery Mode (Volume Up and Volume Down to Select between options and Power Button to OK). Viola. Your system will reboot and your’e on Nougat Rom. :laugh:
Follow the procedure correctly you can retrieve it, don’t blame me if you totally damaged/bricked your device.
Hit Like and Press Thanks. :good:
If you have any doubts you can mail me at [email protected]